HeatBloc -Ultra
HeatBloc-Ultra is radiant heat barrier coating. It has the lowest (best) emissivity rating of any liquid product on the market today of .19. HeatBlok Ultra has almost no odor and very low VOCs so it is an environmentally friendly product.
- Low emissivity, high reflectivity
- Permeable, does not trap moisture
- Easily installed using standard airless or air atomization spray equipment or rollers
- Does not block cellular or antennae signals as can occur with foil products
- One operator can easily install 1000 ft.²/hour using a spray rig
- Excellent investment, normally saves 10 - 15% of AC costs, improves comfort levels
- Improves efficiency of existing insulation
- Only economical way to retrofit radiant barrier to existing structures
- Increase the value of your home
| Understanding Heat Transfer Into Buildings |
|
|
|
|
|
It can be difficult to understand why radiant barrier products work in buildings. The video below helps explain it in a way most people can relate to. We hope this will answer many of your questions and take the mystery out of why radiant barrier products work. |
Testing Information
RIMA, the Reflective Insulation Manufacturers Association, performed testing of the most widely used IRCCS, Interior Radiation Control Coating Systems, otherwise known as attic radiant barrier coatings. The test results show that HeatBloc is the most effective coating on the market. Click to see pdf report.
Effects on Roof Shingles
A regular concern with the use of radiant barriers that are applied to the roof decking is: Does it have a negative effect on the life or warranty of the shingles? Again, RIMA has produced a report explaining that there is no detrimental effect to roof shingles and that it should not invalidate a shingle warranty. However, you should check your warranty and contact the manufacturer to verify their particular warranty requirements. Click here to read pdf report.
Tech Data sheet:
Application and Specifications:
MSDS:
