Yes! You can install closed-cell foam insulation in your Florida home attic. Like any other material, closed-cell foam keeps your home comfortable by preventing heat transfer and air infiltration.
But how does it compare with other insulation types? Here we'll briefly discuss some merits and demerits of open-cell and closed-cell foam.
Highest Insulation "R-Value" per inch
R-value measures insulation effectiveness. That means the higher the R-value, the better the insulating material resists heat transfer. Closed-cell foam has a much higher rating than open-cell foam at a staggering 6.2 per inch compared to 3.7 per inch.
As such, the closed-cell foam provides more thermal protection in vulnerable areas such as the attic. This barrier prevents heat loss, keeping your home more comfortable and reducing the cost of your energy consumption.
Low Vapor Permeability
An insulating material should prevent energy loss and offer moisture protection. The attic area of your house is particularly vulnerable to moisture. It could be due to humidity from the outside or daily activities in your home.
This water creates a conducive environment where microbes and bacteria can thrive. As a result, they lower your indoor air quality and pose a threat to your health. The moisture may also cause water damage.
To prevent that from happening, you need an insulation material such as closed-cell foam in your attic. As the name suggests, the foam has very little space between the cells, which makes it difficult for moisture to pass through. On the other hand, open-cell foam is much more porous. Although controlled, it will absorb moisture from the air.
Superior Air barrier
An airtight insulator will create a barrier between outdoor air and the indoor area. That way, your HVAC system remains more efficient as it does not have to contend with outdoor air seeping into the attic. Closed-cell foam has a higher air tightness rating compared to open-cell foam.
Its closely packed cells can create an impenetrable barrier that is superior to any other material out there. That means no drafts or air leakage through the attic area, causing your HVAC system to operate inefficiently.
Superb Strength And Tear Resistance
Of course, you want an insulation material that can last long without any signs of tear or wear. It's a considerable investment, and you don't want to have to replace it any time soon. In this regard, closed-cell foam is more robust than open-cell foam.
Its tightly packed cells can resist tears and punctures from nails and other sharp objects. This makes it an excellent choice for the attic, as you don't have to worry about rodents or other pests getting in.
Contact All Florida Insulation
At All Florida Insulation, we have extensive experience installing closed-cell foam insulation. As insulation masters with over ten years of experience, we guarantee superior installation services at competitive prices. Call us at (407) 410-FOAM (3626) for all your insulation needs, or fill out our online contact form to request a free estimate. We work in Orlando, Windermere, Longwood, Winter Garden, Altamonte, and Gotha, as well as the surrounding areas.
Click to learn more about us.
Yes. You need insulation in your Florida home throughout the winter months.
While Florida is renowned for its warm and sunny weather, it's not immune to the cold temperatures of winter. Although the temperature may rarely drop below freezing, it's still essential for homeowners to ensure their homes are adequately insulated against the winter.
Benefits of Insulating Your Florida Home
Save On Heating Costs & Reduces Energy Bills
HVAC is the biggest consumer of power in most American homes. And the cost is even higher where there is poor insulation or none at all. That's because conditioned air gets lost, forcing the HVAC to work more than necessary to maintain your preferred comfort levels.
With insulations, that doesn't have to be the case. You get to have your HVAC work at a minimum. The result is reduced cost of heating and your overall energy bills.
Reduce Your HVAC were and Tear
Adding insulation in your Florida home helps maintain constant temperatures. That means your HVAC system won't run as much or keep turning on and off. With less reduced usage, there is less wear and tear, resulting in fewer repairs. It also enhances its service life.
Improves Your Comfort Levels
Cold and hot spots within your home are annoying, especially when one room seems more headed than another. There is also an issue of outside noise that can disrupt your comfort.
You can improve temperature consistency with simple insulation. You also won't have to worry about noise from outdoors.
Where to Insulate
Anywhere that cold air can enter your home should be insulated to keep the warm air in. This includes attics, crawl spaces, walls, windows, and doors.
While Florida doesn't experience freezing temperatures in winter, it's still essential to ensure that your home is well-insulated. Insulating your home will help to keep it warm and reduce energy bills throughout the season.
At All Florida Insulation, we understand the unique needs of Florida homeowners, and our team of experts can provide you with the best insulation solution for your home. Contact us today to learn more.
We are privileged to serve Orlando, Windermere, Winter Park, Winter Garden, Lake Mary, and Altamonte, as well as the nearby communities.
Click to see all our services.
Is blown-in cellulose or spray foam better?
This is one of the questions you might have as you look for the best one to insulate your attic.
Insulation is crucial in Orlando and Central Florida for the comfortability and safety of your home. It prevents rotting from moisture and helps control the temperatures of your house. Also, it is a requirement in the building code.
Here are three types of attic insulations available and effective in Florida:
Spray Foam Insulation
Spray foam has two types:
Closed-cell insulation for the attic is the best type on the market, and this is why:
The differences between the closed and open-cell foam insulation are:
However, it has benefits too:
So is blown-in cellulose or spray foam better? Spray foam insulation is better than batts and blown-in cellulose for home insulation. It costs more upfront but you save more on your power bill and enjoy a lifetime of comfort.
Blown-in Cellulose Insulation
Blown-in cellulose insulation is one of the types that are popular among homeowners. It has an R-value of 3.5, an excellent rate to keep your home comfortable.
The downside of cellulose insulation
So far the question ‘is blown-in cellulose is better or spray foam?’, is clear. Spray foam stands as the best attic insulation.
Fiberglass batts Insulation
Fiberglass insulation is the most commonly used in Florida homes because it costs very little than the other insulation types. It has the lowest R-value of 2.5. However, it is practical, fire and water-resistant, and easy to install.
The downside to fiberglass batts is the airtightness of attics with distinctive designs. It can leave spaces where air can sip through, reducing the R-value.
When it comes to choosing which type of insulation to install for your attic, it comes down to your preference and the cost. With the options and information above, you will be in a better position to make a decision.
At All Florida Insulation, we offer all the above insulation options and more. Is blown-in cellulose or spray foam better? That depends on your specific needs. We service Orlando, Windermere, Longwood, Winter Park, Lake Nona, and the surrounding areas.
Visit our website and get in touch with our experts who will walk with you through the project.
If your attic has always been an “out of sight, out of mind” area of your home, then you are certainly missing out on a lot of storage and even extra living space opportunities. And if you are finally looking for ways on how to take advantage of your attic space, then you are certainly making a great move.
The attic is usually used as a storage space. Other homeowners find climbing up to the attic inconvenient, so they choose to clutter up the entire house instead and leave the attic as is.
Today, let’s find out how you can make most out of all the space you have in the attic. Check out the tips below.
Tips to Make Your Attic Space Useful
Declutter. If there’s plenty of clutter and junk in the attic, get rid of them if you can. Dispose of the things you no longer need, donate those that are still usable, or perhaps you can even sell some useful items you don’t like to keep anymore.
Insulate. The attic can get very hot and uncomfortable during the summer and extremely cold during the winter. Install proper insulation – and make sure you cover the insulation as needed!
Install Proper Ventilation. Especially when you apply new insulation in your attic, it could be extra humid up there. So you must also make sure you have proper ventilation in your attic area.
Repaint. A new layer of fresh paint can definitely make your attic a more attractive space – and you might even end up wanting to make it an extra living space. So after repainting, bring up some furniture and decorate the area as well.
Install Proper Lighting. If you plan on using the attic often, perhaps as a meditation area or home office, then you must have proper lighting there too.
Contact Us for Attic Insulation in Orlando, FL
Now that you already know how to take advantage of your attic space, then it’s time to move it! If you’re considering an insulation upgrade, contact All Florida Insulation. We are the go-to pros of residents and business owners all over Orlando, Maitland, Longwood, Winter Park, Deltona, Sanford, Windermere, Ocoee, Lake Mary, and the surrounding areas who need spray foam insulation and all other insulation services. Call (407) 410-FOAM (3626) to request a free quote.
Florida can get very hot and humid almost year round. That is why it is best to install the best attic insulation for Florida climate to maximize its benefits and efficiency. You need to choose an insulation type with an adequate R-value that would be enough to keep your home comfortable no matter the type of weather outdoors.
In Orlando, for instance, the average minimum yearly temperature is placed at 72.5°F with the hottest months of June to September averaging between 81 to almost 83°F. Colder seasons are not exactly cold compared to other states with an average of 60.3°F experienced in January.
The Importance of Choosing the Best Attic Insulation for Florida
When it is usually warm and humid in your area, you tend to turn on the air-conditioning for as long as possible. Also, your AC unit needs to work twice or thrice as much to keep your home cool all day and night long. Expect your energy bill to become higher than the usual. This can be prevented, however, when you install the right insulation for your home. Your home’s insulation will help trap the temperature inside so your AC doesn’t have to use too much power to keep the interior cool.
Among the insulation types you can choose from are spray foam insulation, injected foam, radiant barriers, blown-in insulation, and block foam insulation among many others. It is important to install the right type of attic insulation because most of the heat from outdoors are trapped in the attic. When the attic gets especially hot, the heat can travel to other areas of your home making you and your family feel uncomfortably warm especially during the day.
The Benefit of Using Spray Foam Insulation
Spray foam insulation is one of the best choices for attic insulation for your Florida home. When applied properly, it can completely seal your attic so that no air comes in our out of this area. This prevents your air conditioner from having to work twice as much especially on hotter days. Spray foam can help decrease indoor temperature in your attic by up to 10 to 15 degrees!
Closed cell spray foam insulation has a higher R-value compared to open cell spray foam. The exact R-value depends on the thickness of insulation installed in your attic. It is always best to work with a licensed insulation contractor so you are well-informed on the actual R-value required to sufficiently insulate your attic area.
Contact Us for Attic Insulation in Orlando, FL
The best attic insulation for Florida is spray foam insulation because of its efficiency and ability to seal all corners, no matter how narrow or small, so that temperature remains controlled in the attic. It is important, however, to work with a licensed and knowledgeable contractor to ensure that the process is done properly to maximize the benefits of this type of insulation.
If you are located in Orlando, Maitland, Longwood, Winter Park, or any of the surrounding communities, make sure you reach out to All Florida Insulation for your spray foam insulation needs for your attic. Contact us at (407) 410-FOAM (3626) to schedule an appointment and to request a free quote.
Should I cover attic insulation? This is probably one of the questions you have in mind as you climb up to your attic and once again got in contact with the fibers of your insulation. Not only does exposed insulation look unattractive, but one may also worry about it getting damaged overtime when it is unprotected. Furthermore, some insulation materials may be toxic.
However, covering insulation in the attic doesn’t seem necessary for some since the attic isn’t a living space in most homes. Homeowners don’t frequently stay in the attic and guests aren’t usually invited to come up to this space. There’s no immediate need to make it pretty.
But aside from aesthetic purposes, some attic insulation materials are better covered. You just have to make sure you are choosing the right cover as doing this improperly can decrease the efficiency and effectiveness of your insulation.
What Type of Cover Should I Use for My Attic Insulation?
If you will be covering attic insulation, the number one rule is that you shouldn’t cover it with another layer of insulation. This will cause all sorts of moisture problems that would ultimately damage the original insulation and possibly even the overall integrity of your home’s structure.
If your purpose when you decide to cover attic insulation is so you won’t touch the exposed insulation when up in the attic, you can easily use some twine or nylon cords to keep the insulation in place.
Alternatively, you can use a piece of plywood or even drywall to conceal the insulation. You may also look into breathable home wrap materials that won’t trap moisture within the insulation.
Contact Us for Attic Insulation in Orlando, FL
At All Florida Insulation, we will help you with all of your insulation needs. If you wish to cover your attic insulation after installation, just let our team know so we can give you our expert recommendations. We specialize in spray foam insulation and install all other insulation materials in Longwood, Winter Park, Orlando, and the surrounding areas. Contact us at (407) 410-FOAM (3626) to get a free quote.
Chris has been an insulation professional for more than two decades, and has experience with all types of residential and commercial insulation products. His passion is green energy and effective insulation applications.